基于八面体理论的岩石循环加-卸载本构模型及修正

探究岩石的受力特点及破坏特性是研究岩石地下工程安全性的关键,诸多学者都期望能在岩石本构模型的研究上取得突破性进展。在此背景下,提出了一种能够描述循环加-卸载条件下岩石的本构模型。首先,假设岩石的微元强度服从八面体剪应力理论并且微元破坏服从Weibull概率公式,将岩石本构中的损伤变量以及岩石微元强度表达式里包含的损伤因子进行本构变换,得到关于应力、应变等其他表现加-卸载下岩石损伤本构模型的参数,表示出岩石微元强度和损伤变量,再将得到的岩石微元强度和损伤变量代入所提出的岩石本构模型中,并进行等式变换得到一个函数表达式。通过将其与实验数据进行拟合对比分析,得出修正后的拟合参数,将其代入函数式中,得到损伤本构模型的修正式。最后将拟合参数进行必要的敏感性分析,得出各拟合参数的实际物理意义。     

Three-dimensional interfacial fracture analysis of a one-dimensional hexagonal quasicrystal coating

In this paper, the three-dimensional (3D) interfacial fracture is analyzed in a one-dimensional (1D) hexagonal quasicrystal (QC) coating structure under mechanical loading. A planar interface crack with arbitrary shape is studied by a displacement discontinuity method. Fundamental solutions of interfacial concentrated displacement discontinuities are obtained by the Hankel transform technique, and the corresponding boundary integral-differential equations are constructed with the superposition principle. Green’s functions of constant interfacial displacement discontinuities within a rectangular element are derived, and a boundary element method is proposed for numerical simulation. The singularity of stresses near the crack front is investigated, and the stress intensity factors (SIFs) as well as energy release rates (ERRs) are determined. Finally, relevant influencing factors on the fracture behavior are discussed.     

Increased Stress Resistance and Lifespan in Chaenorhabditis elegans Wildtype and Knockout Mutants—Implications for Depression Treatment by Medicinal Herbs

Depression and anxiety disorders are widespread diseases, and they belong to the leading causes of disability and greatest burdens on healthcare systems worldwide. It is expected that the numbers will dramatically rise during the COVID-19 pandemic. Established medications are not sufficient to adequately treat depression and are not available for everyone. Plants from traditional medicine may be promising alternatives to treat depressive symptoms. The model organism Chaenorhabditis elegans was used to assess the stress reducing effects of methanol/dichlormethane extracts from plants used in traditional medicine. After initial screening for antioxidant activity, nine extracts were selected for in vivo testing in oxidative stress, heat stress, and osmotic stress assays. Additionally, anti-aging properties were evaluated in lifespan assay. The extracts from Acanthopanax senticosus, Campsis grandiflora, Centella asiatica, Corydalis yanhusuo, Dan Zhi, Houttuynia cordata, Psoralea corylifolia, Valeriana officinalis, and Withania somnifera showed antioxidant activity of more than 15 Trolox equivalents per mg extract. The extracts significantly lowered ROS in mutants, increased resistance to heat stress and osmotic stress, and the extended lifespan of the nematodes. The plant extracts tested showed promising results in increasing stress resistance in the nematode model. Further analyses are needed, in order to unravel underlying mechanisms and transfer results to humans.     

Polyphenols and Fish Oils for Improving Metabolic Health: A Revision of the Recent Evidence for Their Combined Nutraceutical Effects

Polyphenols and omega-3 polyunsaturated fatty acids from fish oils, i.e., eicosapentaenoic and docosahexaenoic acids, are well-recognized nutraceuticals, and their single antioxidant and anti-inflammatory properties have been demonstrated in several studies found in the literature. It has been reported that the combination of these nutraceuticals can lead to three-fold increases in glutathione peroxidase activity, two-fold increases in plasma antioxidant capacity, decreases of 50–100% in lipid peroxidation, protein carbonylation, and urinary 8-isoprotanes, as well as 50–200% attenuation of common inflammation biomarkers, among other effects, as compared to their individual capacities. Therefore, the adequate combination of those bioactive food compounds and their single properties should offer a powerful tool for the design of successfully nutritional interventions for the prevention and palliation of a plethora of human metabolic diseases, frequently diet-induced, whose etiology and progression are characterized by redox homeostasis disturbances and a low-grade of chronic inflammation. However, the certain mechanisms behind their biological activities, in vivo interaction (both between them and other food compounds), and their optimal doses and consumption are not well-known yet. Therefore, we review here the recent evidence accumulated during the last decade about the cooperative action between polyphenols and fish oils against diet-related metabolic alterations, focusing on the mechanisms and pathways described and the effects reported. The final objective is to provide useful information for strategies for personalized nutrition based on these nutraceuticals.     

Unveiling the relevance of the redox character of nitroaromatic and nitroheteroaromatic compounds as potential medicines

This review discusses the state of the art, challenges, and perspectives in recent applications of nitroaromatics and nitroheteroaromatics, which are redox-bio-activated drugs or leads, in Medicinal Chemistry. It deals mainly with the electrochemical approach toward the electron transfer-based molecular mechanisms of drug action, drug design, estimation and measurement of redox potentials, correlation of physicochemical and pharmacological data, and electrochemical studies of the main representatives of nitro-containing prodrugs, along with approaches to combat their toxicity issues, aiming at a better therapeutic profile. Electrochemical investigation plays essential roles, being strategic in the design and discovery of potential medicines.     

InSb芯片碎裂与迸溅金点的关系

批量生产中经常发生的锑化铟(InSb)芯片碎裂问题制约着InSb红外焦平面探测器(IRFPAs)成品率的提升.经分析认为:低周期液氮冲击下发生在器件边沿区域的InSb芯片破碎与该区域中迸溅金点的存在有关.为从理论上明晰迸溅金点对InSb芯片局部碎裂的影响,本文建立了包含迸溅金点的InSb IRFPAs结构模型,分析了迸溅金点的存在对应力分布的影响.在此基础上,在应力集中处预置不同长度的初始裂纹用以描述InSb晶片中的位错,以能量释放率为判据,探究InSb芯片碎裂与迸溅金点和位错线长短的关系.结论如下:1)迸溅金点的存在对InSb芯片碎裂的影响是局部的,在迸溅金点与InSb芯片接触区域的两侧会形成两个应力集中点; 2)环绕预置裂纹的能量释放率会随着预置裂纹长度的增加而加速增大,当预置裂纹长度接近InSb芯片上表面时,能量释放率近乎指数增加,并在预置裂纹贯穿InSb芯片时达到最大值; 3)迸溅金点引起的InSb芯片破碎属于Ⅰ型断裂失效模式,在多周期液氮冲击中,位错线在应力集中效应的驱使下逐步扩展,直至贯穿InSb芯片,最终形成宏观碎裂失效现象.     

Cold,warm, and hot programming of shape memory polymers

In this article, programming is classified as hot, warm, and cold, based on the temperature zone within which the programming is conducted. The strain and stress locking and releasing mechanisms are discussed within the thermodynamics framework. A new formula is developed for quantifying the strain recovery ratio of cold-programmed SMPs. Stress fixity ratio and stress recovery ratio are also defined based on the understanding of stress locking and recovery mechanisms. State-of-the-art literature on warm and cold programming is reviewed. Well-controlled programming as well as free strain recovery test and constrained stress recovery test are conducted, in order to validate the memory mechanisms discussed in this study. It is found that, while programming temperature has an insignificant effect on the final free shape recovery, it has a significant effect on the stress recovery. The recovery stress programmed by cold programming may be lower, equal to, or higher than that by hot programming, due to the different stress locking mechanisms and other factors such as damage during the thermomechanical cycle. Cold, Warm, and Hot Programming of Shape Memory Polymers © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1319–1339     

The ASBM-SA turbulence closure: Taking advantage of structure-based modeling in current engineering CFD codes

Structure-based turbulence models (SBM) carry information about the turbulence structure that is needed for the prediction of complex non-equilibrium flows. SBM have been successfully used to predict a number of canonical flows, yet their adoption rate in engineering practice has been relatively low, mainly because of their departure from standard closure formulations, which hinders easy implementation in existing codes. Here, we demonstrate the coupling between the Algebraic Structure-Based Model (ASBM) and the one-equation Spalart–Allmaras (SA) model, which provides an easy route to bringing structure information in engineering turbulence closures. As the ASBM requires correct predictions of two turbulence scales, which are not taken into account in the SA model, Bradshaw relations and numerical optimizations are used to provide the turbulent kinetic energy and dissipation rate. Attention is paid to the robustness and accuracy of the hybrid model, showing encouraging results for a number of simple test cases. An ASBM module in Fortran-90 is provided along with the present paper in order to facilitate the testing of the model by interested readers.     

Degradation of a polyester‐urethane coating: Physical properties

In this article we studied the evolution of thermomechanical properties of a polyester‐urethane coating during degradation under different degradation conditions, i.e., aerobic and anaerobic conditions with and without dry/wet cycling during degradation. Dynamic mechanical and thermal analyses show that under aerobic conditions the coatings become stiffer and more brittle in the glassy state. This stiffening is probably due to the increase in the amount of hydrogen bonding and the formation of oxidized groups which increase the polarity of the material and enhance the interactions of the polymer segments. However, oxidation reactions result in a considerable decrease in cross‐link density and stiffness in the rubbery state. Both changes, in the glassy and rubbery states, give rise to development of internal stresses. These stresses increase as the degradation process proceeds. Nevertheless, for samples exposed to anaerobic conditions, the stiffness remains constant in the glassy state and the cross‐link density slightly increases as a result of degradation. This reconfirms the dominance of the effect of oxidation reactions on the mechanical failure of the coatings. Oxygen permeation measurements show a more‐or‐less time‐independent diffusion coefficient and a gradual decrease in solubility of oxygen as a function of exposure time. This results in a slight decrease in oxygen permeation (mainly in the early stage of the degradation) as degradation proceeds. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 659–671     

CALCULATION FORMULAS FOR PRINCIPAL STRESSES

在前人工作的基础上,运用一元三次方程的理论直接求解应力状态的特征方程,得到了实用的主应力计算公式.